1972 Dodge Challenger Base Coupe Parking Fridge Magnet
1972 Dodge Challenger Base Coupe Aluminum Parking Sign
For 1972 model year, the front of the Challenger was reworked including the addition of a new grille that extended beneath the front bumper, as well as new rear tail-lights. The options lists (both for performance and appearance/convenience items) had been drastically cut back. The convertible version (though a sun-roof was made available), most interior upgrade options (in particular leather seats), comfort/convenience items (in particular power windows and power seats), and all the big-block engine options were gone. The R/T series was replaced by the Challenger Rallye series. The Rallye model featured four simulated vents on the front fenders, from which exited matte black strobe tape stripes. As Dodge did not offer the Hemi or the 440 for 1972, the engine choices were down to three: the 225 cu in (3.7 L) slant-6, 318 cu in (5.2 L) V8, and a 340 cu in (5.6 L) V8 that was equipped with a 4-barrel carburetor, dual exhausts, as well as a performance-oriented camshaft and heads. All three engines were detuned to lower compression ratios in order to run on lead-free gasoline, and the horsepower ratings were lowered to reflect the more accurate Society of Automotive Engineers (SAE) net horsepower calculations. Each engine could be mated to a 3-speed manual or automatic transmission, while the 340 could also be equipped with a 4-speed manual if so ordered. The performance axle ratios were also gone except for a 3.55 sure grip which could only be had with the 340 and the heavy duty suspension. Toward the end of the 1971 model year a few convertibles were made with the 1972 front end (grille, lights, etc.) and rear end (tail lights and their panel). Sales were slow with less than 25,000 units being produced.
Make it clear: Your 1972 Dodge Challenger Base Coupe deserve a reserved parking spot in your garage! Just like the real street signs, our signs are quality made of .025" Aluminum that will not rust, crack or break and are UV protected for outdoor use and durability. The sign has rounded corner and two 1/4 inch pre-drilled holes on top and bottom for easy display. Ideal for home, garage, office, workshop, Man cave, private roadways or anywhere you fill you deserve a special parking or deco spot, and they make the ideal gift for any car enthusiast. They are available in two sizes 12" X 18" (305 X 457 mm) or 8" X 12" (203 X 305 mm) to suit your need and space. 1972 Dodge Challenger Base Coupe Parking Only Sign.
Available in two sizes: 12" X 18" (305 X 457 mm) or 8" X 12" (203 X 305 mm)
Two 1/4 inch pre-drilled holes on top and bottom
UV protected for outdoor use and durability
This product is made in the USA
*Dodge Challenger or any other marks are registered trademarks. Our products are not approved by any of these manufacturers and trademarks. We do not imply any association with these manufacturers and references are based on historical information in the public domain.