My Cart

Close
Free Shipping over $100 to Continental USA

1973 Ford Gran Torino Sport Sportsroof Smartphone Case - Side View

Product Code: 1973_FORD_GRAN_TORINO_SPORT_FB_BIG_BLK
$22.90

1973 Ford Gran Torino Sport Sportsroof Cell Phone Case for Smartphone

The most obvious change for the 1973 model saw was a new front fascia, required to meet new federal regulations. The new regulation mandated that all cars manufactured after September 1, 1972, must be able to take a 5 mph (8.0 km/h) strike to the front without damaging safety related components such as headlamps and the fuel system. For 1973 only, rear bumpers had a 2.5 mph (4.0 km/h) requirement. The Torino's front end featured totally new sheetmetal from the firewall forward, with a blunt, more squared-off fascia replacing the previous year's pointed prow. The new large square 5 mph (8.0 km/h) energy absorbing bumper replaced the almost body-fitting chrome bumper used on the front of the 1972 Torino. The new larger bumpers caused all Torino models to increase in length by at least 1 in (25 mm), and weight also increased by at least 100 lb (45 kg) for all models. Rear bumpers and taillights were unchanged from 1972. For 1973, Gran Torino Sport had its own unique emblem, which it displayed in the grille and on the trunk lock cover. The laser stripe was revised to a slightly different shape, and ran higher along on the body side. The Sport no longer had a hood scoop, and the Ram Air induction option was gone. The Sport was available as a 2-door SportsRoof or a 2-door hardtop but was otherwise unchanged from the 1972 model year. In the Car and Driver magazine road test of a 1973 Gran Torino Sport, the suspension was noted to be a good balance of comfort and handling. Car and Driver wrote that the Torino was as "..quiet as a Jaguar, smooth as a Continental, the Torino's ride is exceptional...even with the competition suspension." Their test of a SportsRoof equipped with the 351 CJ, C-6 automatic, and 3.25:1 gears, resulted in a 0 – 60 mph time of 7.7 seconds while the quarter-mile went by in 16.0 seconds at 88.1 mph. The 0 – 60 mph time was 0.9 seconds slower than the 1972 model Car and Driver tested a year before; however, this can partially be attributed to differences in gear ratio, transmission type, and an almost 350 lb (160 kg) increase in weight. The 1973 Sport had a test weight of 4,308 lb (1,954 kg), while the 1972 had a test weight of 3,966 lb (1,799 kg).[24] For comparison, in a Motor Trend test of a 1970 Torino 2-door equipped with a 351-4V, Cruise-O-Matic, and 3.00:1 gears, they recorded a 0 – 60 mph time of 8.7 seconds, and a quarter-mile time of 16.5 seconds at 86 mph. However, the high compression 1970 motor required premium fuel, while the low compression 1973 motor could run on regular.

A game of subtle lights and shadows reveal the magnificent curves of the body of this Legendary American Muscle Car: The 1973 Ford Gran Torino Sport Sportsroof one of the most influential vehicles of the 20th century. A true Car Legend that lives forever. The harmonious, accurate, and elegant illustration of the 1973 Ford Gran Torino Sport Sportsroof is printed on an aluminum insert, surrounded by a black durable plastic case. Available in several bright colors, it will not peel or fade. The Cell Phone Cases are available for Apple iPhone and Samsung Galaxy Smartphones.

Available in:
Black • Silver Grey • Military Green • LeMans Blue • British Green • Racing Blue • Dark Red • Cattail Brown • Steel Blue • Good Orange • Italian Red • Light Blue • light Pink • Hot Pink
for:
Apple iPhone 4 • 4s • 5 • 5s • 5SE • 6 • 6s • 6 Plus • 6s Plus • 7 • 7 Plus • 8 • SE • 8 Plus • X • XS • XS Max • XR • 11 • 11 Pro • 11 Pro Max • 12 Mini • 12 • 12 Pro • 12 Pro Max • 13 Mini • 13 • 13 Pro • 13 Pro Max
Samsung Galaxy S4 • S5 • S6 • S7 • S8 • S8+ • S9 • S9+ • S10 • S10e • S10+ • S20 • S20+ • S20 Ultra • S20 Lite • S20 FE • S21 • S21+ • S21 Ultra • S21 FE • S22 • S22+ • S22 Ultra

The cover / case is made of Hard Plastic (Flexible Rubber for iPhone 13 models and Samsung Galaxy S20, S21 and S22 models) and a Printed Aluminum Insert.
The image is permanently infused into the aluminum that will not crack, fade, chip, or peel (we do not use stickers or decals).
Easy access to all buttons and features of your phone, plug your charger cable, and headset without removing the case. (inductive charging is not supported).
The Smartphone is not included. You will receive 1 (one) Smartphone case / cover / skin only.
This Smartphone Case is brand new with tag. It is in stock, packed in a bubble bag, and ready to ship.
This product is designed, printed & packed in the USA.

* Ford or any other marks are registered trademarks. Our products are not approved by any of these manufacturers and trademarks. We do not imply any association with these manufacturers and references are based on historical information in the public domain.