My Cart

Close
Free Shipping over $100 to Continental USA

Ford Torino Cobra 1971 Emblem Novelty License Plate

Product Code: 1971_COBRA_EMBLEM_LP_BABYBLUE
$17.90

Ford Torino Cobra 1971 Emblem License Plate

By 1970, the new Torino was influenced by the “Coke bottle style”. inspired by supersonic aircraft to produce this style. The 1970 model Torino was longer, wider, and lower. The roof starts high at the windshield, but slopes back into the Sportsroof rear treatment, which splits the difference between fastback and formal-roof with a single unbroken line that goes from the top of the rear window to the rear quarter caps, before they flip into a small aerodynamic trunk lip. Despite this, the 1970-'71 Torino Sportsroof is actually less aero-friendly than the car it replaced. Granted, engine and performance options had gotten half a decade hairier as well. The Torino Cobra, not to be confused with the Cobra Jet engine that it could optionally pack, or the lightweight two-seat Shelby Cobra roadster, was Ford's top-of-the-line Torino when the new body style debuted for 1970. Standard-issue was the 360hp Thunderjet 429 with two-bolt mains, 2.09/1.65 valves, 10.5:1 compression and a 600-CFM Autolite on top. That car carried over to '71 with most options intact, though the standard Cobra engine was downgraded to the 10.7:1 compression, 285hp 351 Cleveland four-barrel--probably to placate the insurance goons who made sure that insurance rates were as stiff as car payments. For roughly 10 percent of a Torino Cobra's cost (or $374, in 1971 money), you could opt into the 429CJ engine. Your cash earned you a powerplant sporting a 700-CFM GM Rochester carb, slightly smaller combustion chambers, 2.24/1.72 valves, a compression bump to 11.3:1 and stronger main-bearing webbing. The Torino was heavier for the year 1970 however it still held on with strong performance. Motor Trend tested a 1970 Torino Cobra that included a Ram Air 370 hp, 429 Cobra Jet, C-6 automatic, and 3.50:1 rear axle. After testing this model, they stated “The weight obviously helped traction, as it was fairly easy to accelerate away from a standing start with only a modicum of wheelspin.”

Perfect for all car enthusiasts that want to show their passion for their car by adding style, showing your pride, or enhancing the appearance of your vehicle with this novelty license plate. This license plate shows the magnificent Ford Torino Cobra 1971 Emblem on a colorful background with racing stripes. Choose between 16 different colors to customize your vehicle to the fullest. Our license plates are quality made of .032" Aluminum that will not rust, crack, break or peel and are UV protected for outdoor use and durability. This Ford Torino Cobra 1971 Emblem Novelty License Plate can also be used to decorate the walls in your garage, office, workshop, man cave, or any other room or anywhere you feel you deserve decoration spot.

Available in: Baby Blue - Black - British Green - Cattail Brown - Dark Red - Good Orange - Gray - Hot Pink - Italian Red - LeMans Blue - Light Green - Military Green - Racing Blue - Steel Blue - White - Yellow

Made of .032 Aluminum
6" x 12" (153 x 306 mm) standard automotive license plate size
4 holes for easy mounting
Water-resistant
UV protected for outdoor use and durability
The image is permanently infused into the aluminum that will not crack, fade, chip, or peel (we do not use stickers or decals)..
This product is made in the USA.

* Ford or any other marks are registered trademarks. Our products are not approved by any of these manufacturers and trademarks. We do not imply any association with these manufacturers and references are based on historical information in the public domain.