1969 Ford Mustang BOSS 429 Fastback with Shades Reserved Parking Fridge Magnet
1969 Ford Mustang BOSS 429 Fastback Aluminum Parking Fridge Magnet
With the help of Kar Kraft, Ford's special vehicle shop, the new 429 cubic-inch engine was placed within the engine bay of the Mustang. The engine was a single overhead cam Ford V8 with a large bore and hemispherical combustion chambers. It had aluminum heads that created a crescent-shaped, 'semi-Hemi' combustion chamber, one Holley four-barrel carburetor was installed and all Boss 429s built in 1969. Power was stated at 375 horsepower but was more likely closer to 500 hp. Ford elected to create the ultimate ponycar by dropping it into the Mustang. The production process required many modifications, including cutting and relocating the shock towers to create the room necessary to fit the large engine. The battery was moved to the trunk, and a 3/4-inch sway bar was added to the rear axle. A large opening was cut in the hood to feed more air to the 429. The functional scoop mounted on the hood was the largest of any production Mustang, controlled manually from inside the car. Since air conditioning couldn't fit under the hood, it was not offered. The Boss 429 had a base price of $4,087, making it the most expensive non-Shelby Mustang to date. Color choices were limited to just five relatively conservative exterior colors in 1969, although this would change in 1970.
Perfect for all car enthusiasts that want to show their passion for their 1969 Ford Mustang BOSS 429 Fastback. Make room on the fridge and make it clear: Your 1969 Ford Mustang BOSS 429 Fastback deserves a reserved parking spot in the middle of the other magnets. The magnet is 2” x 3” (77 x 51 mm) and is quality made of .045” Aluminum that will not fade or break. It has rounded corner and a 1/2 inch square magnet in the back. Stick it to anything you'll like, on your fridge, workbench, toolbox, or man cave board. The colors are brights, vibrants and contrast beautifully. For any car guy, this is the ideal gift to add style and show their pride, even in the middle of the kitchen.
Available in: One color style only
- Made of 0.045” (1.14 mm) Durable Aluminum Material
- Size 3" x 2" (76.2 mm x 50.8 mm)
- Water-resistant & easy to clean
- 1” backer magnet for adhesion
The image is permanently infused into the aluminum that will not crack, fade, chip, or peel (we do not use stickers or decals).
- Made in USA
* Ford or any other marks are registered trademarks. Our products are not approved by any of these manufacturers and trademarks. We do not imply any association with these manufacturers and references are based on historical information in the public domain.